Inspiration

Easy Stone Silverware

by Marie Segal

Do you have some silverware that is looking a little boring, banged up or you just need a facelift in your kitchen? Recycling and reusing is oh so vogue right now and the Cernit nature colors make this a fun project with little cost, and you are using the old stuff again instead of buying more silverware. This is a very easy project with dramatic results and you probably have some stamps already. We are using the stamps mostly for texture anyway, not really for the image, but some do show up.

Materials:

  • Cernit Clay: granite, basalt, or sienna (nice thing about the granite color is that it can be tinted with the regular colors of Cernit for a colored granite. Shown here is 1 part of granite mixed with 1/4 part of color.
  • Clay Blade
  • Silverware: old and used or metal handled dollar store stuff is best, I got mine at Smart and Final
  • Neopaque acrylic paint: black or in the color of your choice, or you could even use the Lumiere colors for a metallic effect
  • Rubber Stamps: shells (www.rubberstampplantation.com)
  • Pasta machine or a rolling pin or brayer
  • 3/4" stencil brush
  • Old piece of towel or toweling

Condition and roll out the Granite on the 3rd thickest setting, this will be less than 1/8" thick. Trim off one end of the sheet of clay for the straight edge. Place the handle of the silverware on the sheet of clay and trim around the one side of the handle.

Step 1

Step 2

Fold the rest of the sheet of clay over the handle and press the edges together, make sure the sheet is tight on the handle with as few air bubbles as possible.

Step 3

Press the sheet down to the trimmed edge, cut off the excess and smooth the seam.

Step 4

Now take your stamps and press into the clay on the handle. Hold the utensil by the working end, not the handle, to press the stamps on it. Continue to press different stamps into the clay. I usually work on the back of the handle and then go to the front of the handle. If you don't press it in far enough, it is ok. You just go back and press another stamp over that until it is all covered. Don't forget the sides of the handle also.

Step 5

Step 6

Bake in a preheated 275 degree F oven for 30 minutes, shut off the oven and let cool while still in the oven.

When the silverware is cool, load up the stencil brush with the black paint and "punch" in the paint on the handle to make sure you get paint in the indents. Dampen the towel with a little water and wipe of the excess paint. If you take too much off, place paint on the handle again and then wipe away excess. I do all the handles by antiquing them with the black paint one at a time.

Step 7

Step 8

Finished project

PDF Icon

Printer friendly PDF:
Easy Stone Silverware


Artist:

Marie Segal is a nationally known polymer clay artist. Her work ranges from beads and jewelry to figurative pieces. She and her husband, Howard, own The Clay Factory in Escondido, California.

You can see Marie's work at these websites: